FreeBSD Post-Install Hardening
 | UNDER CONSTRUCTION: The document is currently being modified! |
Now that you have a solid baseline FreeBSD installation lets move on to configuring and hardening your system. In this article I will be covering setting up ports, installing some base software, setting up a user environment, and fixing some basic security concerns. The test system I will be using for this and all articles following this is from the FreeBSD Installation article. I personally will not be using a ZFS-based test system merely because using ZFS inside of VirtualBox is a bit redundant.
Again for this and all my other articles I am assuming you have a basic understanding of the shell and the computer in general (See Also: Category:FreeBSD). Assuming you have the FreeBSD machine installed, booted up and logged in as root, let us begin.
Ports
The FreeBSD Ports and Packages Collection (ports) offers a simple way for users and administrators to install applications. As there are a few basic system applications we will be needing to install lets get ports up to date. To do so we will be using csup(1) and an example supfile left from installation.
mkdir ~/csup/
cp /usr/share/examples/cvsup/ports-supfile ~/csup/
csup -L 2 -h cvsup10.us.freebsd.org ~/csup/ports-supfile
This will take a moment or two depending on the speed of your connection to the internet and the CVSup server you chose.[1] Once the ports collection is installed the next step is to setup some ports, kernel and world build options.
/etc/make.conf & /etc/src.conf
Both located in /etc/ the primary purpose of make.conf is to control the compilation of the FreeBSD sources, documentation, and ported applications; where as the only purpose of src.conf is to control the compilation of the FreeBSD source code.[2] Note that changing these documents is completely optional and is not required. However after years of using FreeBSD myself I have found that these few settings will simplify and quicken a lot of things on the system, mainly if you are someone who compiles everything from source. If you are not this type of person maybe you can skip this section, I would still recommend looking it over at the very least. Some things will still be applicable, jails for example need special attention toward to src.conf.
make.conf
I will be going at this file piece by piece as it is a fairly large file and to paste it all at once I feel would be a bit daunting. I will be explaining each section in sufficient detail as I go along. Please note that I am obviously assuming you have at least a basic knowledge of editing files in vi(1) as this is the default editor on FreeBSD. If you do not feel comfortable using vi(1), you can always use the cat(1) method of creating files which was used in the installation articles (example shown below).
cat >> /etc/make.conf << _EOF_
| <i><file contents></i> _EOF_ |
Lets begin with CVSup and SVN configuration.
 | PORTSSUPFILE= /root/ports-supfile SUP= /usr/bin/csup SUP_UPDATE= YES SUPFLAGS= -L 2 SVN_UPDATE= YES |
These options are used to implement usage of make update inside of /usr/ports/ in order to update the ports tree. SUP_UPDATE turns the option on, while SUP and SUPFLAGS are used to control which CVSup program to use and what arguments to pass to it. PORTSSUPFILE will need to be set to the location of your ports supfile that you copied previously from the installed examples. Finally SVN_UPDATE is used to enable the use of make update inside of /usr/src/ for updating your source tree.
| ## KERNEL/WORLD CFLAGS= -O3 -pipe -funroll-loops -ffast-math -fno-strict-aliasing COPTFLAGS= -O2 -pipe -funroll-loops -ffast-math -fno-strict-aliasing INSTALL_NODEBUG= YES KERNCONF= CHLOE .if ${.CURDIR:M*/usr/src/*} || ${.CURDIR:M*/usr/obj/*} MAKEOPTS+= -j8 .endif |
For use with ports and buildworld CFLAGS are used for passing settings when compiling C code. -O3 uses the largest number or practical optimizations (level 3), in the process of doing so however it sacrifices binary size for speed. -pipe causes code to be piped between processes during compilation rather than using temporary files, this has obvious I/O advantages. -funroll-loops causes iterating loops with a known number of iterations to be unrolled into faster executions. -ffast-math breaks IEEE/ANSI strict math rules; one way it does this is by assuming that the square root of numbers are non-negative. This shouldn't be used if you're compiling code that relies on the exact implementation of IEEE or ANSI rules for math functions. Unless you're writing your own code that does exactly this you shouldn't have any problems.
The COPTFLAGS option is for passing settings when compiling the kernel specifically. Dropping down to an optimization level of 2 as level 3 is known to break kernels (Note: -O is the only one that is officially supported). All the other settings being passed are the same as in use with CFLAGS.
| ## DOCUMENTATION DOC_LANG= en_US.ISO8859-1 |
This is used to make sure all of the documentation that is compiled on the system is in the correct language/encoding.
| ## PERFORMANCE BUILD_OPTIMIZED= YES BUILD_STATIC= YES NO_PROFILE= YES OPTIMIZED_CFLAGS= YES WITH_CPUFLAGS= YES WITH_MMX= YES WITH_OPTIMIZED_CFLAGS= YES WITH_SSE= YES WITH_THREADS= YES WITHOUT_DEBUG= YES |
This is a set of default ports knobs that will decrease compilation time, yet have no effect on how ports operate and function. Most of these have to do with enabling CPU-related settings.
| WITHOUT_X11= YES |
This settings can optionally be added to the list of settings above if you are building a server that will not be running Xorg.
| ## PORTS .if !empty(.CURDIR:M*/usr/ports/*) WRKDIRPREFIX= ${PORTSDIR}/obj NOPORTDATA= YES NOPORTDOCS= YES #NOPORTEXAMPLES= YES FORCE_MAKE_JOBS= YES MAKE_JOBS_NUMBER= 8 #UNSAFE_PORTS= this/port #UNSAFE_PORTS+= that/port .for port in ${UNSAFE_PORTS} DISABLE_MAKE_JOBS= YES .endfor WITH_ACPI= YES WITH_LINUX= YES WITHOUT_GSSAPI= YES WITHOUT_IPV6= YES WITHOUT_JAVA= YES WITHOUT_KERBEROS= YES WITHOUT_NAS= YES WITHOUT_NLS= YES # Xorg WITH_ASPELL= YES WITH_GTK2= YES WITH_IMLIB2= YES WITH_MPLAYER= YES WITH_NVIDIA_GL= YES WITH_UTF8= YES WITH_XFT= YES WITHOUT_ARTS= YES WITHOUT_ESOUND= YES WITHOUT_GCONF= YES WITHOUT_GNOME= YES WITHOUT_GNOMEVFS= YES WITHOUT_GNOMEVFS2= YES WITHOUT_GSTREAMER= YES WITHOUT_GTK1= YES WITHOUT_GTKSPELL= YES WITHOUT_HAL= YES WITHOUT_ISPELL= YES WITHOUT_KDE= YES WITHOUT_NAUTILUS= YES WITHOUT_QT= YES WITHOUT_XINE= YES WITHOUT_XMMS= YES .endif |
These are all wrapped up in an if statement as to only apply to ports. To start, setting WRKDIRPREFIX will change the working directory used to extract/compile ports from. NOPORTDATA, NOPORTDOCS, and NOPORTEXAMPLES are the three settings for turning off the installation of additional data and examples in /usr/local/share and the installation of documentation in /usr/local/doc. FORCE_MAKE_JOBS turns on multithreaded compiling of ports while MAKE_JOBS_NUMBER controls how many to run in parallel. Typically you will want to set this to a number that is double the amount of CPU cores you have. Then directly below this commented out is the example of how to add ports to the list that do not compile with multithreaded compilation turned on. Then accordingly the for statement and DISABLE_MAKE_JOBS will turn off multithreading for said ports. Finally I have a list of typical ports knobs I use with all of my systems (these are completely optional, and the Xorg ones can easily be left out on servers).
| ## USER .if !empty(.CURDIR:M*/usr/ports/*) WITH_OPENSSH_CHROOT= YES WITHOUT_HUGE_STACK_SIZE= YES WITHOUT_PERL_64BITINT= YES WITHOUT_PERL_MALLOC= YES .endif BROWSER= firefox WITH_BROWSER= firefox OVERRIDE_LINUX_BASE_PORT= f10 OVERRIDE_LINUX_NONBASE_PORTS= f10 PYTHON_VERSION= 2.7 PYTHON_DEFAULT_VERSION= python2.7 |
Lastly we have the user ports knobs, this is where you should add in your custom ports knobs (either per port or in general for the whole ports tree). Next I have set my default web browser to firefox, the linux emulator port default to f10, and then python has been set to use version 2.7.
(Temp) Creation Notes
02. Download your make.conf and src.conf files.
bsd# cd /etc
bsd# fetch http://privatebox.org/bsd/etc/make.conf(.jail/.zfs) bsd# fetch http://privatebox.org/bsd/etc/src.conf(.jail/.zfs)
03. Install the default editor, sudo and subversion-freebsd.
bsd# cd /usr/ports/editors/nano; make install clean; bsd# cd /usr/ports/security/sudo; make install clean;
bsd# cd /usr/ports/devel/subversion-freebsd; make install clean;
bsd# setenv EDITOR nano
04. Change the way passwords are stored to blowfish, fetch login.conf, run the database
rebuiler, then reset the root password. bsd# cd /etc bsd# fetch http://privatebox.org/bsd/etc/auth.conf bsd# fetch http://privatebox.org/bsd/etc/login.conf bsd# cap_mkdb /etc/login.conf bsd# passwd To double check that these changes work you should open up the /etc/master.passwd file and make sure the root password starts with "$2a"
05. Clean out the default user files directory
bsd# cd /usr/share/skel/; rm dot.rhosts; bsd# fetch http://privatebox.org/bsd/home/dot.cshrc bsd# fetch http://privatebox.org/bsd/home/dot.login bsd# fetch http://privatebox.org/bsd/home/dot.login_conf bsd# fetch http://privatebox.org/bsd/home/dot.mail_aliases bsd# fetch http://privatebox.org/bsd/home/dot.profile
bsd# cp dot.cshrc ~/.cshrc; cp dot.login ~/.login; cp dot.login_conf ~/.login_conf; bsd# cp dot.mail_aliases ~/.mail_aliases; cp dot.profile ~/.profile;
bsd# cd; rm .k5login; bsd# touch /etc/COPYRIGHT bsd# chmod g+rwx /usr/src /usr/obj
06. Add a users group, then modify the default adduser settings, remove the toor user
account and add yourself a shell user that you will now always ssh from (instead of root).
bsd# pw groupadd users
bsd# adduser -C
Uid (Leave empty for default):
Login group []: users
Enter additional groups []:
Login class [default]: users
Shell (sh csh tcsh nologin) [sh]: tcsh
Home directory [/home/]:
Home directory permissions (Leave empty for default): 0700
Use password-based authentication? [yes]:
Use an empty password? (yes/no) [no]:
Use a random password? (yes/no) [no]:
Lock out the account after creation? [no]:
Pass Type : yes
Class : users
Groups : users
Home : /home/
Home Mode : 0700
Shell : /bin/tcsh
Locked : no
OK? (yes/no): yes
Re-edit the default configuration? (yes/no): no
Goodbye!
bsd# pw userdel toor
bsd# adduser
Username : k
Password : *****
Full Name : *****
Uid : 420
Class : root
Groups : wheel
Home : /home/k
Home Mode : 0700
Shell : /bin/tcsh
Locked : no
OK? (yes/no): yes
adduser: INFO: Successfully added (k) to the user database.
Add another user? (yes/no): no
Goodbye!
07. Update the doc and source tree from SVN, then copy over the kernel configuration
file and then check it into the RCS.
bsd# cd /usr/src/ bsd# svn checkout svn://svn.freebsd.org/base/stable/8 /usr/src bsd# cd /usr/src/sys/i386/conf (This would be /usr/src/sys/amd64/conf on an amd64 system) bsd# fetch http://privatebox.org/bsd/home/HUB bsd# ci -u HUB
08. Time to upgrade FreeBSD to its most current version, we will benchmark also.
bsd# cd /usr/src bsd# buildworld
This step will take ~30m-1h.
bsd# buildkernel bsd# sudo make installkernel bsd# sudo reboot
This is the hope and pray that you did everything right stage... When the box comes back up login via ssh and su to root. Then start up mergemaster preperation and then finally installworld and run mergemaster again (rule of thumb for running mergemaster, if your RCS'd it don't overwrite it). Then reboot the machine yet again.
bsd# cd /usr/src bsd# mmp
bsd# sudo make installworld bsd# mm bsd# sudo reboot
09. Install openssh_portable to replace standard ssh, then replace the sshd_config file
and restart sshd
bsd# cd /usr/ports/security/openssh-portable; sudo make install clean; bsd# cd /etc/ssh bsd# sudo fetch http://privatebox.org/bsd/etc/ssh/sshd_config bsd# sudo fetch http://privatebox.org/bsd/etc/ssh/sshd_banner bsd# sudo /usr/local/etc/rc.d/openssh onestart
NOTE: Please at this time make sure you can login to ssh, if you can not, then you need to review the steps and retrace what you did.
10. SSH back into the box and su to root. Then, retrieve all new modified system
files into your /etc folder. Then check them all into the RCS.
bsd# cd /etc bsd# fetch http://privatebox.org/bsd/etc/rc.conf bsd# fetch http://privatebox.org/bsd/etc/crontab bsd# fetch http://privatebox.org/bsd/etc/hosts bsd# fetch http://privatebox.org/bsd/etc/hosts.allow bsd# fetch http://privatebox.org/bsd/etc/newsyslog.conf bsd# fetch http://privatebox.org/bsd/etc/periodic.conf bsd# fetch http://privatebox.org/bsd/etc/sysctl.conf bsd# fetch http://privatebox.org/bsd/etc/syslog.conf
11. Install portupgrade/portaudit and audit already installed ports.
bsd# cd /usr/ports/ports-mgmt/portaudit bsd# sudo make install clean bsd# cd ../portupgrade && sudo make install clean bsd# cd ../pkg_cutleaves && sudo make install clean bsd# sudo portaudit -Fda
12. Make /tmp the only temp.
bsd# mv /var/tmp/* /tmp; rm -rf /var/tmp; ln -s /tmp /var/tmp
(NOTE: If you recieve the message "Operation not permitted" on any of the files when you try to move/remove them you need to "chflags noschg <file/dir>")
13. Restrict access to crontab to root and your shell user account only. Then
set proper permissions on the file. Then enable accounting.
bsd# echo 'root' > /var/cron/allow; echo 'k' >> /var/cron/allow; bsd# chmod 0600 /var/cron/allow
14. Run the secure_me.sh file to set proper permissions to all system files.
bsd# cd; mkdir scripts; cd scripts; bsd# fetch http://privatebox.org/bsd/other/secure_me.sh; chmod +x secure_me.sh; bsd# ./secure_me.sh
