ThinkPad:Benchmarking: Difference between revisions

From Wiki³
Line 6: Line 6:
For testing I installed the following packages.
For testing I installed the following packages.
{{Console|1=yaourt -S mesa-demos hdparm}}
{{Console|1=yaourt -S mesa-demos hdparm}}
=== glxgears ===
=== dd (ssd write) ===
{{Console|1=dd if{{=}}/dev/zero of{{=}}$HOME/tempfile bs{{=}}1M count{{=}}1024 conv{{=}}fdatasync,notrunc status{{=}}progress}}
=== glxgears (vsync) ===
{{Console|1=glxgears}}<br/>
{{Console|1=glxgears}}<br/>
{{Console|Running synchronized to the vertical refresh.  The framerate should be<br/>approximately the same as the monitor refresh rate.<br/>304 frames in 5.0 seconds {{=}} 60.715 FPS<br/>301 frames in 5.0 seconds {{=}} 60.049 FPS<br/>301 frames in 5.0 seconds {{=}} 60.050 FPS<br/>301 frames in 5.0 seconds {{=}} 60.050 FPS<br/>301 frames in 5.0 seconds {{=}} 60.048 FPS<br/>301 frames in 5.0 seconds {{=}} 60.049 FPS<br/>301 frames in 5.0 seconds {{=}} 60.050 FPS<br/>301 frames in 5.0 seconds {{=}} 60.048 FPS<br/>301 frames in 5.0 seconds {{=}} 60.050 FPS<br/>301 frames in 5.0 seconds {{=}} 60.048 FPS<br/>301 frames in 5.0 seconds {{=}} 60.045 FPS<br/>301 frames in 5.0 seconds {{=}} 60.055 FPS<br/>301 frames in 5.0 seconds {{=}} 60.049 FPS<br/>301 frames in 5.0 seconds {{=}} 60.049 FPS<br/>|prompt=false}}
{{Console|Running synchronized to the vertical refresh.  The framerate should be<br/>approximately the same as the monitor refresh rate.<br/>304 frames in 5.0 seconds {{=}} 60.715 FPS<br/>301 frames in 5.0 seconds {{=}} 60.049 FPS<br/>301 frames in 5.0 seconds {{=}} 60.050 FPS<br/>301 frames in 5.0 seconds {{=}} 60.050 FPS<br/>301 frames in 5.0 seconds {{=}} 60.048 FPS<br/>301 frames in 5.0 seconds {{=}} 60.049 FPS<br/>301 frames in 5.0 seconds {{=}} 60.050 FPS<br/>301 frames in 5.0 seconds {{=}} 60.048 FPS<br/>301 frames in 5.0 seconds {{=}} 60.050 FPS<br/>301 frames in 5.0 seconds {{=}} 60.048 FPS<br/>301 frames in 5.0 seconds {{=}} 60.045 FPS<br/>301 frames in 5.0 seconds {{=}} 60.055 FPS<br/>301 frames in 5.0 seconds {{=}} 60.049 FPS<br/>301 frames in 5.0 seconds {{=}} 60.049 FPS<br/>|prompt=false}}
=== hdparm ===
=== hdparm (ssd read)===
{{Console|1=sudo hdparm -Tt /dev/sda}}<br/>
{{Console|1=sudo hdparm -Tt /dev/sda}}<br/>
{{Console|/dev/sda:<br/> Timing cached reads:  12822 MB in  2.00 seconds {{=}} 6414.67 MB/sec<br/> Timing buffered disk reads: 790 MB in  3.00 seconds {{=}} 263.13 MB/sec|prompt=false}}
{{Console|/dev/sda:<br/> Timing cached reads:  12822 MB in  2.00 seconds {{=}} 6414.67 MB/sec<br/> Timing buffered disk reads: 790 MB in  3.00 seconds {{=}} 263.13 MB/sec|prompt=false}}
=== systemd-analyze ===
=== systemd-analyze (boot speed)===
This plot is a detailed graphic of the boot sequence.
This plot is a detailed graphic of the boot sequence.
{{Console|1=systemd-analyze plot ~/boot.svg}}
{{Console|1=systemd-analyze plot ~/boot.svg}}

Revision as of 00:36, 17 July 2017

IconUNDER CONSTRUCTION: The document is currently being modified!

Test Results

For testing I installed the following packages.

# yaourt -S mesa-demos hdparm

dd (ssd write)

# dd if=/dev/zero of=$HOME/tempfile bs=1M count=1024 conv=fdatasync,notrunc status=progress

glxgears (vsync)

# glxgears


Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
304 frames in 5.0 seconds = 60.715 FPS
301 frames in 5.0 seconds = 60.049 FPS
301 frames in 5.0 seconds = 60.050 FPS
301 frames in 5.0 seconds = 60.050 FPS
301 frames in 5.0 seconds = 60.048 FPS
301 frames in 5.0 seconds = 60.049 FPS
301 frames in 5.0 seconds = 60.050 FPS
301 frames in 5.0 seconds = 60.048 FPS
301 frames in 5.0 seconds = 60.050 FPS
301 frames in 5.0 seconds = 60.048 FPS
301 frames in 5.0 seconds = 60.045 FPS
301 frames in 5.0 seconds = 60.055 FPS
301 frames in 5.0 seconds = 60.049 FPS
301 frames in 5.0 seconds = 60.049 FPS

hdparm (ssd read)

# sudo hdparm -Tt /dev/sda


/dev/sda:
Timing cached reads: 12822 MB in 2.00 seconds = 6414.67 MB/sec
Timing buffered disk reads: 790 MB in 3.00 seconds = 263.13 MB/sec

systemd-analyze (boot speed)

This plot is a detailed graphic of the boot sequence.

# systemd-analyze plot ~/boot.svg

ThinkPad X220 Boot Analysis.svg